Head of Laboratory

Klaus Pozzi

+49 (0) 68 98 / 6 92 - 5825
service-dap(at)durr.com

Inquiry Management

Heiko Brill

+49 (0) 68 98 / 6 92 - 5851
heiko.brill(at)durr.com

Ute Mörschel

+49 (0) 68 98 / 6 92 - 5436
ute.moerschel(at)durr.com 

Peter Odenbreit

+49 (0) 68 98 / 6 92 - 5402
peter.odenbreit(at)durr.com 

Downloads

Certificate

Accredited test laboratory for vehicle testing systems

Thanks to our accredited test laboratory we are able to assess the conformity of certain measurement systems. The test laboratory has implemented the strict requirements for test and calibration laboratories and maintains the official accreditation according to DIN EN ISO/IEC 17025 since 2002.

With a conformity evaluation carried out by our accredited test laboratory you can increase the legal certainty in relation to product liability.

In the scope of our accredited laboratory we validate the following:

  • roller diameter
  • speed measurement
  • force measurement 

For example, the following is required by the Regulation No. 39 of the United Nations Economic Commission for Europe (UN/ECE):

  • According to Regulation No. 39 (UN/ECE) it must be guaranteed that the speedometer of every newly produced vehicle is tested during production with a testing device which shall be accurate to ± 0.5%.

If, in your production, this measurement device is a roll test stand, we can offer a validation of your test stand with conformity evaluation.

Video x-cal


In the scope of maintenance works we can offer an acceptance test certificate 3.1 acc. DIN EN 10204 for the following measuring quantities:

  • inertia (inertia mass) / reduced mass relating to roller circumference/diameter